Customization: | Available |
---|---|
Usage: | Server |
Type: | Wired |
Still deciding? Get samples of US$ 200/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
The H801MCUD1 board is a Mini Control Unit Board. It is the core of the system control and service switching and aggregation. The H801MCUD1 board can also function as the management and control core of the integrated network management system (NMS). It communicates with service boards about the key management and control information through the master/slave serial port and inband GE/10GE channel. In this manner, the H801MCUD1 board configures, manages, and controls the device, and also implements the simple route protocol functions.
The H801MCUD1 board supports the following functions:
Figure 1 shows the external connections of the H801MCUD1 board.
Figure 1 External connections of the H801MCUD1 board
Figure 2 illustrates the working principle of the H801MCUD1 board.
Figure 2 Working principle of the H801MCUD1 board
The basic working principles of the H801MCUD1 board are as follows:
Table 1 describes the front panel of the H801MCUD1 board.
Table 1 Front panel of the H801MCUD1 board
RUN ALM: running status indicator |
||
Green: blinks every 1s |
The board functions properly. |
|
Red: blinks every 0.25s |
The board is starting up. |
|
Orange: on for 0.25s and off for 0.25s repeatedly |
A high-temperature alarm is generated. |
|
Red: on |
The board is faulty. |
|
ACT: active indicator |
||
Green: on |
The board is in the active state in the active/standby or load sharing mode. |
|
Off |
The board works as a standby board in the active/standby mode. |
|
Green: on for 0.1s and off for 0.1s repeatedly |
The board works as a standby board in the load sharing mode. |
|
LINK/ACT: link/data status indicator |
||
Green: on |
A connection is being set up on the port. |
|
Green: blinking |
Data is being transmitted. |
|
Off |
No connection is set up or no data is transmitted on the port. |
|
CAUTION:
RESET: This button is used to reset the board manually. Resetting the board interrupts the services. Hence, exercise caution when using the reset button. |